Management of thoracic outlet syndrome in patients with hemodialysis access.

Patients with threatened arteriovenous access are often found to have central venous stenoses at the ipsilateral costoclavicular junction, which may be resistant to endovascular intervention. Stenoses in this location may not resolve unless surgical decompression of thoracic outlet is performed to relieve the extrinsic compression on the subclavian vein. The authors reviewed the management of dialysis patients with central venous lesions at the thoracic outlet, as well as the role of surgical decompression with first-rib resection or claviculectomy for salvage of threatened, ipsilateral dialysis access.

The infraclavicular approach for venous thoracic outlet syndrome.

Venous thoracic outlet syndrome (vTOS) is an esoteric condition that presents in young, healthy adults. Treatment includes catheter-directed thrombolysis, followed by first-rib resection for decompression of the thoracic outlet. Various techniques for first-rib resection have been described with successful outcomes. The infraclavicular approach is well-suited to treat the most medial structures that are anatomically relevant for vTOS. A narrative review was conducted to specifically examine the literature on infraclavicular exposure for vTOS. The technique for this operation is described, as well as the advantages and disadvantages of this approach. The infraclavicular approach is a reasonable choice for definitive treatment of uncomplicated vTOS.

Clavicular tunnel widening after acromioclavicular joint reconstruction: comparison between single and double clavicular tunnel techniques.

Acromioclavicular joint (ACJ) reconstruction using artificial ligaments is a common surgical treatment for Rockwood grade III or higher injuries. These techniques use bone tunnels in the clavicle and coracoid to insert the Tightrope implants. This multicenter retrospective study compares long term radiographic follow up of clavicular tunnel widening in two groups of patients with high-grade ACJ injury who underwent reconstruction using two different surgical techniques. The first group of 23 patients underwent an arthroscopic single clavicular tunnel ACJ reconstruction. The second group of 23 patiënts underwent an open double clavicular tunnel reconstruction. Inclusion criteria are Rockwood grade III or higher injury and minimum 18 months of follow-up. Exclusion criteria are distal clavicle fracture and additional stabilization techniques. Radiographic results were measured on anteroposterior shoulder radiographs taken at the first and last follow-up. Clavicular tunnel widening is the main outcome measurement. Secondary outcomes are heterotopic ligament calcifications, migration of buttons, tunnel fracture and loss of acromioclavicular reduction. The mean clavicular tunnel widening in the single clavicular tunnel technique is 1.91 mm. In the double clavicular tunnel technique, the widening of the medial tunnel is 2.52 mm and 3.59 mm in the lateral tunnel. The difference in widening between the single tunnel and the lateral tunnel is significant (p=0.003). A very clear observation on all follow-up X-rays was a reorientation of the clavicular tunnels towards the coracoid. The double clavicular tunnel technique has more tunnel widening in both tunnels compared to the single bundle technique.

Intra-pulmonary migration of a clavicle osteosynthesis pin: a case report.

BACKGROUND: Fractures of the clavicle are common injuries, which often require reduction and internal fixation. Although Kirschner pins have been commonly used to treat these fractures with good results, migration of these devices may result in severe internal lesions. CASE PRESENTATION: We report herein the case of 61-year-old man, who presented for intrapulmonary migration of a Kirschner pin, 25 years after closed reduction and fixation of a clavicle fracture. CONCLUSION: Migration of an osteosynthesis pin can be lethal. Patients with osteosynthesis pins, should have a regular follow, until the removal of the wires.

Symptomatic Nonunion of the Coracoid Process Following Osteosynthesis Using a Suture Button for Coracoid Process and Distal Clavicle Fracture: A Case Report.

BACKGROUND Coracoid process fractures are uncommon and are often complicated by many types of shoulder girdle injuries. Previous reports have shown that osteosynthesis for isolated coracoid process fractures results in favorable outcomes and high bone union rates. However, owing to the rarity of coracoid process fractures combined with distal clavicle fractures, there are limited data to guide treatment strategies. We report a case of symptomatic nonunion despite performing osteosynthesis for fractures of the coracoid process and distal clavicle. CASE REPORT A 60-year-old man presented with left shoulder pain after falling from the back of a truck. Radiography and computed tomography (CT) findings revealed fractures of the left distal clavicle and coracoid process. We performed plate and costoclavicular fixation using a suture button for the distal clavicle fracture and cannulated cancellous screw fixation for the coracoid process fracture. However, the patient experienced severe pain around the coracoid and had limited shoulder range of motion 1 year postoperatively. CT revealed nonunion of the coracoid process, prompting a recommendation for surgery. However, despite severe persistent functional impairment, the patient refused surgery 1.5 years postoperatively. CONCLUSIONS This case suggests the potential for symptomatic nonunion of the coracoid process when using a suture-button device for a distal clavicle fracture. To prevent postoperative nonunion of the coracoid process, postoperative CT evaluation is necessary. If a symptomatic delayed bone union of coracoid process is observed, considering early removal of the suture button is recommended.

[Digital study on proximal clavicle anatomical plate based on 3D printing technology].

OBJECTIVE: To explore feasibility of 3D metal printing technology combined with virtual design proximal clavicle anatomical plate. METHODS: A 52-year-old male healthy volunteer was retrospectively selected to design proximal clavicle anatomical plate system by using Mimics15.01,NX12.0 and other software. STL data were input into 3D printer to print 1:1 clavicle model and proximal clavicle anatomical plate. The fit of the plate was tested in vitro and the accuracy of screw position was evaluated by imaging. Printing time of model,nail path design and fabrication time of the anatomical plate at proximal clavicle were recorded. RESULTS: The 3D metal printing proximal clavicle anatomical plate fitted well to clavicle model,orientation of proximal clavicle locking screw was accurate,and X-ray and CT scan showed the screw position was good. Printing time of model,the time of nail path design,and the time of making anatomical plate of proximal clavicle were 120,15 and 300 min respectively. CONCLUSION: The proximal clavicular anatomical plate system based on 3D metal printing technology could achieve good lamination of proximal clavicular fracture plate and precise screw placement,providing a new and accurate surgical method for the treatment of the proximal clavicular fracture.

A novel surgical method for treating fractures of the middle third of the clavicle.

BACKGROUND: The clavicle is recognized as the bone most vulnerable to fractures. Moreover, approximately 80% of fractures occur in the middle third of the clavicle. Conservative treatment is associated with a higher rate of nonunion, while surgical treatment of fracture via internal fixation may have a variety of postoperative complications. Therefore, to improve patient satisfaction and reduce the complications related to internal fixation techniques, we modified the surgical approach to external fixation. OBJECTIVE: The purpose of this study was to assess the modified intervention's prospects for clinical application. METHODS: A total of 36 patients with middle clavicle fractures were treated with screw-rod external fixation between April 2015 and October 2019. We observed the operative time, intraoperative blood loss, length of hospital stay, and fracture healing time. The patients were followed up regularly, and the clinical efficacy of the modified intervention was evaluated. Finally, the patients' shoulder function was assessed based on the disabilities of the arm, shoulder, and hand (DASH) score. RESULTS: For the screw-rod external fixation, the mean operative time was found to be 48.6 ± 6.8 min, the intraoperative blood loss was 30.6 ± 17.2 mL, the length of hospital stay was 4.5 ± 1.5 days, and the fracture healing time was 2.8 ± 0.4 months. Eventually, all the patients healed well, with the combined "excellent" and "good" rate of shoulder function being assessed to be as high as 94.44%. Furthermore, the DASH scores were all less than 10, with the average score being 4.65 ± 3.34. CONCLUSIONS: The screw-rod external fixation technique offers the advantages of convenience, reliability, and good aesthetics, suggesting that it could be used as an alternative treatment method for fractures of the middle third of the clavicle.

[Open reduction and internal fixation in treatment of four cases of bipolar clavicle dislocations].

Objective: To summarize the method and effectiveness of open reduction and internal fixation in the treatment of 4 cases of bipolar clavicle dislocations. Methods: Between June 2017 and June 2022, 4 patients with bipolar clavicle dislocations were admitted. There were 3 males and 1 female. The age ranged from 27 to 63 years, with an average age of 45 years. There were 2 cases of crushing injury of mine car, 1 case of traffic accident injury, and 1 case of heavy object injury. The time from injury to operation was 3-7 days, with an average of 5.0 days. The sternoclavicular joint dislocations were classified as Grade Ⅱ in 1 case and type Ⅲ in 3 cases, and anterior dislocation in 3 cases and posterior dislocation in 1 case. The acromioclavicular joint dislocations were classified as Tossy type Ⅱ in 2 cases and type Ⅲ in 2 cases. After open reduction, the sternoclavicular joint and acromioclavicular joint were fixed with lateral malleolus locking titanium plate and clavicular hook plate, respectively. Results: All operations were successfully completed without vascular or nerve injury. All incisions healed by first intention. All patients were followed up 12-18 months, with an average of 14 months. At last follow-up, the shoulder joint functions were rated as excellent in 3 cases and good in 1 case according to Rockwood score. During follow-up, there was no loosening of internal fixator or fracture. The internal fixators were removed in all patients at 5-7 months after operation (mean, 6 months), and no re-dislocation occurred after removal. Conclusion: For bipolar clavicle dislocation, open reduction combined with lateral malleolus locking titanium plate fixation of the sternoclavicular joint and clavicle hook plate fixation of the acromioclavicular joint can achieve good effectiveness. It has the advantages of simple operation, high safety, firm fixation, and fewer complications, and the shoulder function recovers well.

Surgical and non-surgical treatment for fully displaced lateral clavicle fractures have similar outcomes: An observational register study of 113 patients.

INTRODUCTION: Whether displaced lateral clavicle fractures should be treated surgically remains controversial. This study aims to compare outcomes after surgical versus non-surgical treatment of such fractures. PATIENTS AND METHODS: 113 patients with lateral clavicle fractures registered in the Swedish Fracture Register (SFR) during 2018 and with complete displacement on radiography were included in this cohort study. Linkage with the National Patient Register provided information on baseline medical comorbidities and further interventions. Patient-reported outcome measures (PROM) were assessed using the European Quality of Life Scale (EQ-5D-3L), the Short Musculoskeletal Function Assessment (SMFA), and the Quick Disabilities of the Arm, Shoulder and Hand (QDASH). The primary outcome was the total number of initial and delayed surgical procedures. The secondary outcome was difference in PROM between surgically and non-surgically treated patient groups. RESULTS: At a mean follow-up of 4.4 (range 3.9-4.9) years, 35 (67 %) of the 52 patients initially treated surgically had undergone a secondary procedure, mostly for implant removal. Of the 61 initially non-surgically treated patients, 3 (5 %) underwent delayed surgical treatment due to non- or malunion. 45 (40 %) patients responded to follow-up questionnaires, but no statistically significant differences were found in any PROM between groups. CONCLUSIONS: Two thirds of surgically treated patients with displaced lateral clavicle fractures underwent two procedures. The need for delayed surgical treatment in non-surgically treated patients was low and PROM was similar in both treatment groups. Nonsurgical treatment should be considered as an option to surgery for fully displaced lateral fractures of the clavicle more often.

Comparable results of superior vs antero-inferior plating for the treatment of displaced midshaft clavicle fractures. A comparative study.

BACKGROUND: Clavicle fractures represent up to 10 % of all fractures, affecting mainly a young population. Open reduction and internal plate fixation provide good results, but evidence on the best plate positioning is still unclear. Aim of this retrospective study was to compare superior and antero-inferior plating positioning in the surgical treatment of displaced midshaft clavicle fractures. MATERIALS AND METHODS: 104 patients aged > 18 years, treated surgically with plate fixation (51 superior, 53 antero-inferior) for a midshaft clavicle fracture from January 2010 to April 2021 were included. At the time of the visit, mean follow-up time was 6.6 ± 2.6 years. Shoulder function was evaluated with the use of Constant-Murley Score (CMS) and Disabilities of the Arm, Shoulder, and Hand (DASH) score. Return to sport, aesthetic satisfaction, operative time, radiological outcomes, rate of implant removal, and overall patient satisfaction were documented as well. RESULTS: Mean CMS was 94.1 ± 10.0 points in the superior plating group and 93.4 ± 11.6 points in the antero-inferior plating group. DASH score: 4.6 ± 11.0 superior, 5.1 ± 10.5 antero-inferior. Return to sport: 8.2 ± 2.9 superior, 8.2 ± 3.0 antero-inferior. Aesthetic satisfaction: 8.9 ± 1.6 superior, 8.8 ± 2.1 antero-inferior. Overall satisfaction: 9.1 ± 1.5 superior, 8.9 ± 1.7 antero-inferior. The comparison between groups showed no statistically significant differences (p = n.s.) for all outcome measures. Operative time: 101.6 ± 27.3 min superior, 113.0 ± 31.6 min antero-inferior (p = 0.05). Radiological follow-up documented one non-union and one mal-union in the antero-inferior plating group. Overall, 63 patients underwent plate removal: 58.8 % in the superior plating group and 62.3 % in the antero-inferior plating group (p = n.s.). Main reason for plate removal was pain/discomfort. CONCLUSIONS: Both superior and antero-inferior plating provided excellent clinical, functional, and radiological results for the treatment of displaced midshaft clavicle fractures, without significant differences between groups. The superior plating group showed a statistically shorter operative time. High rate of re-interventions with implant removal was documented in both groups. LEVEL OF EVIDENCE: III.

Clinical effect of nice knot-assisted minimally invasive titanium elastic nail fixation to treat Robinson 2B midshaft clavicular fracture.

BACKGROUND: The treatment of completely displaced midshaft clavicle fractures is still controversial, especially Robinson 2B fractures. Titanium elastic nail (TEN) fixation is a good option for simple fractures, but no reports exist on its use in complex fractures. This study aimed to present a surgical method using the Nice knot-assisted TEN fixation to treat Robinson 2B midshaft clavicular fractures. METHODS: A retrospective analysis of 29 patients who underwent fixation with TEN and had a 1-year postoperative follow-up between 2016 and 2020 was performed. The fractures were classified as Robinson type 2B1 in 17 cases and type 2B2 in 12 cases. Length of the incision, postoperative shoulder function Disability of Arm Shoulder and Hand (DASH) score and Constant score, complications rate, and second surgical incision length were recorded. RESULTS: The length of the incision was 2-6 cm (average 3.7 cm). All incisions healed by first intention, and no infection or nerve injury occurred. The Constant score was 92-100 (average 96) and the DASH score was 0-6.2 (mean, 2.64). TEN bending and hypertrophic nonunion occurred in one case (3.4%) and implant irritation occurred in four cases (13.8%) Fixation implants were removed at 12-26 months (mean, 14.6 months) after surgery, and the length of the second incision was 1-2.5 cm (average 1.3 cm). CONCLUSIONS: Intramedullary fixation by TEN is approved as a suitable surgical technique in clavicular fracture treatment. Nice knot-assisted fixation provides multifragmentary fracture stabilization, contributing to good fracture healing. Surgeons should consider this technique in treating Robinson 2B midshaft clavicular fractures. TRIAL REGISTRATION: Retrospectively registered. This study was approved by the Ethics Committee of Wuxi Ninth People's Hospital (LW20220021).

Immediate Weight-bearing Through Walker or Crutches After Surgical Fixation of Clavicle Fractures in Patients With Lower Extremity Fractures: A Retrospective Cohort Study.

OBJECTIVES: To assess the safety of immediate upper extremity weight-bearing as tolerated (WBAT) rehabilitation protocol after clavicle fracture open reduction internal fixation (ORIF). DESIGN: Retrospective cohort study. SETTING: Three Level 1 trauma centers. PATIENTS SELECTION CRITERIA: Patients older than 18 years who had ORIF of mid-shaft clavicle fractures and lower extremity fractures who were allowed immediate WBAT on their affected upper extremity through use of a walker or crutches were included. All clavicles were fixed with either precontoured clavicular plates or locking compression plates. Included patients were those who had clinical/radiographic follow-up until fracture union, nonunion, or construct failure. OUTCOME MEASURES AND COMPARISONS: WBAT patients were matched in a one-to-one fashion to a cohort with isolated clavicle fractures who were treated non-weight-bearing (NWB) postoperatively on their affected upper extremity. Matching was done based on age, sex, and temporality of fixation. After matching, treatment and control groups were compared to determine differences in possible confounding variables that could influence the primary outcome, including patient demographics, fracture classification, cortices of fixation, and construct type. All patients were assessed to verify conformity with weight-bearing recommendation. Primary outcome was early hardware failure (HWF) with or without revision surgery. Secondary outcomes included postoperative infections and union of fracture. RESULTS: Thirty-nine patients were included in the WBAT cohort; there were no significant differences with the matched NWB cohort based on patient demographics. Both the WBAT and the NWB cohorts had 2.5% chance of acute HWF that required surgical intervention ( P = 1.0). Additionally, there was no difference in overall HWF ( P = 0.49). All patients despite weight-bearing status including those who required revision ORIF for acute HWF had union of their fracture ( P = 1.0). CONCLUSIONS: Our data would support that immediate weight-bearing after clavicle fracture fixation in patients with concomitant lower extremity trauma does not lead to an increase in HWF or impact ultimate union. This challenges the dogma of prolonged postoperative weight-bearing restrictions and allow for earlier rehabilitation. LEVEL OF EVIDENCE: Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

The application of inverted lateral clavicle locking compression plate for medial clavicle fractures: biomechanical study and clinical implementation.

BACKGROUND: There has been no absolute consensus on the optimal implant for fixation of medial clavicle fracture. The purpose of the present study was to test the biomechanical efficacy of inverted lateral clavicle locking compression plate (LCP-LC) in fixation of this specific fracture location by finite element analysis. METHODS: Transverse and comminuted medial clavicle fracture simulated models stabilized by three different devices including inverted LCP-LC, superior clavicle LCP (LCP-SC), and dual reconstruction (LCP-RP) with LCP-SC were investigated biomechanical performance under three loading conditions, i.e., axial compression, inferior bending, and axial torsion. RESULTS: EQV stress exhibited on implant and elastic strain at fracture site under inferior bending was greater than other loading cases. LCP-SC construct represented the greatest EQV stress and elastic strain. The inverted LCP-LC construct demonstrated lower EQV stress than the LCP-SC construct and was comparable to dual plating. Under axial compression and axial torsion, elastic strain produced from the inverted LCP-LC construct was comparable to dual plating, but greater than dual plating when subjected to inferior bending. CONCLUSION: By the results of FE analysis, inverted LCP-LC could be a potential application for fixation of clavicle fracture with short medial fragment.

Treatment of Severely Shortened or Comminuted Clavicular Fractures in Older Adolescent Athletes.

BACKGROUND: Recent evidence suggests that for completely displaced midshaft clavicular fractures, surgery offers no clear benefit over nonoperative treatment in a general adolescent population from 10 to 18 years of age. However, the comparative outcomes of comminuted and/or severely shortened clavicular fractures specifically in older adolescent athletes have not been explored in a focused, methodologically rigorous fashion. HYPOTHESIS: The study hypothesis was that outcomes would be superior in older adolescent athletes who underwent operative treatment compared with nonoperative treatment for comminuted and/or severely shortened clavicular fractures. STUDY DESIGN: Cohort study; Level of evidence, 2. METHODS: A level 2, multicenter, prospective cohort study investigating the outcomes of midshaft fractures in adolescents between 2013 and 2017 was filtered to analyze the subcohorts of athletes 14 to 18 years of age with either fracture comminution or fracture shortening of ≥25 mm or both. Patient characteristics, injury mechanisms, fracture characteristics, and treatments were compared. Complications, rates, timing of return to sports (RTS), and patient-reported outcomes (PROs) were analyzed. RESULTS: The 2 treatment groups, which included 136 older adolescent athletes (69 nonoperative, 67 operative), showed similar distributions of primary sport type, competition level, comminution, shortening, and 2-year PRO response rate (n = 99; 73%). The operative group demonstrated 3 mm-greater mean superior displacement, which was therefore statistically controlled for as a confounder in the comparative PRO analysis. No 2-year differences in nonunion, delayed union, symptomatic malunion, refracture, clinically significant complications, or rates of RTS were detected between treatment groups. The difference in timing of RTS (operative, 10.3 weeks; nonoperative, 13.5 weeks) was statistically significant. After controlling for the minor difference in superior displacement, regression analysis and matched comparison cohorts demonstrated no differences between the nonoperative and operative groups in mean or dichotomized PRO scores. CONCLUSION: In this prospective, multicenter cohort study investigating older adolescent athletes with comminuted and/or severely shortened clavicular fractures, contrary to the study hypothesis, there were no differences in complications, RTS, or PROs between nonoperatively and operatively treated patients at 2 years. Comparably excellent outcomes of severe clavicular fractures in adolescent athletes can be achieved with nonoperative treatment.

New generation of superior single plating vs. low-profile dual minifragment plating in diaphyseal clavicle fractures: a biomechanical comparative study.

BACKGROUND: Recently, a new generation of superior clavicle plates was developed featuring the variable-angle locking technology for enhanced screw positioning and a less prominent and optimized plate-to-bone fit design. On the other hand, minifragment plates in dual plating mode have demonstrated promising clinical results. The aim of the current study was to compare the biomechanical competence of single superior plating using the new-generation plate vs. dual plating using low-profile minifragment plates. METHODS: Sixteen paired human cadaveric clavicles were pairwise assigned to 2 groups for instrumentation with either a superior 2.7-mm variable-angle locking compression plate (group 1), or with one 2.5-mm anterior combined with one 2.0-mm superior matrix mandible plate (group 2). An unstable clavicle shaft fracture (AO/OTA 15.2C) was simulated by means of a 5-mm osteotomy gap. Specimens were cyclically tested to failure under craniocaudal cantilever bending, superimposed with bidirectional torsion around the shaft axis, and monitored via motion tracking. RESULTS: Initial construct stiffness was significantly higher in group 2 (9.28 ± 4.40 N/mm) compared to group 1 (3.68 ± 1.08 N/mm), P = .003. The amplitudes of interfragmentary motions in terms of axial and shear displacement, fracture gap opening and torsion, over the course of 12,500 cycles were significantly higher in group 1 compared to group 2, P ≤ .038. Cycles to 2 mm shear displacement were significantly lower in group 1 (22,792 ± 4346) compared to group 2 (27,437 ± 1877), P = .047. CONCLUSION: From a biomechanical perspective, low-profile 2.5/2.0-mm dual plates could be considered as a useful alternative for diaphyseal clavicle fracture fixation, especially in less common unstable fracture configurations.

Clavicular tunnel widening after coracoclavicular stabilization surgery: a systematic review and meta-analysis.

BACKGROUND: This systematic review and meta-analysis aimed to (1) estimate the prevalence of clavicular tunnel widening (TW) after coracoclavicular stabilization surgery and its risk factors and (2) assess whether TW is correlated with clavicle fracture or loss of reduction of the acromioclavicular joint (ACJ). METHODS: In January 2023, 3 electronic databases were searched to collect data on postoperative clavicular TW, its prevalence, magnitude, and correlation with fracture and ACJ loss of reduction. Studies were classified according to the time of surgical intervention, and the clavicular tunnels were categorized by their anatomic location. Mean differences were calculated using a DerSimonian-Laird random-effects model, while binomial outcomes were pooled using the Freeman-Tukey double arcsine transformation. Univariate and multivariate meta-regression analyses were performed to determine the effect of several variables on the proportion of cases with TW. RESULTS: Fifteen studies (418 shoulders) were included. At the final follow-up, evidence of clavicular TW was found in 70% (95% confidence interval [CI]: 70%-87%; I2 = 89%) of 221 shoulders. Surgeries in acute cases had a lower prevalence of TW (52%) compared to chronic cases (71%) (P < .001). Significant TW was found in the central tunnel (3.2 mm; 95% CI: 1.8-4.6 mm; P < .001; I2 = 72%) for acute injuries and in the medial (1.2 mm; 95% CI: 0.7-1.7 mm; P < .001; I2 = 77%) and lateral (1.5 mm; 95% CI: 0.7-2.3 mm; P < .001; I2 = 77%) tunnels for chronic cases. Single central-tunnel techniques were positively associated with the prevalence of TW (P = .046), while biotenodesis screw fixation was associated with a lower prevalence (P = .004) in chronic cases. Reconstruction of the ACJ ligament complex with tendon grafts or sutures was associated with a higher prevalence of TW (P < .001). Drill sizes between 2.5 and 5 mm were significantly associated with a lower prevalence of TW, regardless of injury chronicity (P = .012). No correlation was found between TW and the loss of ACJ reduction or clavicle fractures. CONCLUSIONS: This systematic review and meta-analysis explored TW occurrence following coracoclavicular stabilization surgery. TW was observed in 70% of patients at final follow-up, with a higher prevalence in chronic than in acute cases. Modifiable surgical variables, such as single-tunnel tendon graft constructs for acute or chronic injuries and knotted graft procedures for chronic injuries, were significantly associated with TW. Furthermore, the prevalence of TW increased with concomitant surgical treatment of the ACJ ligament complex, and decreased with drill sizes between 2.5 and 5 mm, regardless of lesion chronicity. These surgical variables should be considered when establishing transosseous tunnels for coracoclavicular stabilization. Clavicle fractures and TW mechanisms require further investigation.

A novel treatment of clavicular nonunion: Combination with PRP, autologous bone grafting, and internal plate fixation.

BACKGROUND: Nonunion is a major concern for orthopedic surgeons, particularly nonunion of the clavicle, which can cause severe pain, loss of full range of motion, poor sleep quality, and loss of strength in the affected individuals. Platelet-rich plasma (PRP), an important biological agent, is widely used in orthopedics. OBJECTIVE: We used a combination of three techniques - the PRP technique, autologous bone grafting technique, and internal plate fixation technique - to ensure adequate internal fixation and enable a bone growth-supportive environment at the fracture site. METHODS: The surgical approach was applied to a patient with clavicle nonunion. RESULTS: Based on postoperative follow-up findings and intraoperative findings at the time of re-removal of the patient's implant, the prognosis at the fracture site was considered satisfactory. CONCLUSION: We observed that the patient treated with this method had favorable clinical outcomes, and we recommend that this technique be used in patients with long-bone nonunion.